Marine
marine
The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications including live well tanks, circulation and chemical transfer. Buna-N O-ring casing seal, Buna-N mechanical shaft seal is standard. Model 4860-97 is fitted with a 1/8 HP, 12V DC, 3700 RPM motor. (Self-priming model available).
AMT Bronze Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
3/4" Self-Priming Centrifugal Bronze Marine Pump
AMT Self-priming Bronze Centrifugal pumps are compact and designed for a wide range of dewatering/recirculating applications including marine, salt water aquaculture and live well tanks. Model 4850-97 is fitted with a 1/8 HP, 12V DC, 3700 RPM motor.- Cast Bronze Construction
- Buna-N Mechanical Seal and O-Ring
- 3/4" NPT Suction and Discharge Ports
- Maximum Working Pressure 50 PSI
- Maximum Temperature 180ºF
- 1/12 HP, 12V DC
- Maximum Suction Lift is 4 ft.
Bronze Marine Pumps
(2) The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and features provisions for the installation of a seal wash, front drain plug and pull-from-rear design. The unit features Buna-N O-ring casing seal and Buna-N mechanical shaft seal. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a Stainless Steel shaft. On/off switch and line cord are standard.The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications including live well tanks, circulation and chemical transfer. Buna-N O-ring casing seal, Buna-N mechanical shaft seal is standard. Model 4860-97 is fitted with a 1/8 HP, 12V DC, 3700 RPM motor. (Self-priming model available).
AMT Bronze Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
- Bronze Construction
- Buna-N Mechanical Seals and O-Ring
- Maximum Working Pressure 50 PSI
- Maximum Temperature 180° F
- Maximum Flow 17 GPM
- Maximum Head 12 Ft.
- Self-cleaning, Semi-open Impellers
- Totally Enclosed Motors
- 12V DC or 115V AC Motors
